Solution To Fix Canon Printer Error 6c10

Troubleshooting Canon Printer Error 6C10 with Best Canon Printer Support

 

Canon Printer sometimes faces technical error that does not go until you call Canon Technical support number for help. If you are wondering about this particular error of Canon, then this article will help you. When this error strikes, your printer stops working and the system starts displaying the error code 6C10 also known as CAM sensor error.

As soon as the error displayed, you can see the green light flash on pressing the button. After a time both the resume button and on button flashes alternately. It should be noted that unplugging and re-plugging the power and USB cables will not make any difference.

To resolve the error you may require checking the drivers updates. Follow the tutorial below to resolve this error completely.

Canon Printer Models That are Affected with This Error

 

Canon Printer Error 6C10 can appear in printer series MP110,MP550, MP560, MP540, MP600, MP610, MP630, MP800, MP810, MP830, MP970, MP980, MP620, MP640, IP3600, MP990, MG5200, MG5300, MG6100, MG6200, MG8100, MG8200 models of Canon Printer.

 

 

What is this Canon Printer Error 6C10?

 

Error 6C10 is generally occurred either due to a “Reset Canon Printer ink absorber” error or a “Valve Cam Sensor” error. Some of the users don’t know as well where the valve cam sensor is located therefore you require a tech expert’s assistance to locate the sensor. It is said the sensor could be blocked by paper debris but technicians have the way of letting you know the exact location.

There is also a foam strip running almost the full width inside the printer and seems like 95% is clean. Nontech user cannot recognize that’s the “ink absorber” hence you need expert guidance to locate it. There is a button-push sequence designed to place the iP4600 into service mode as well where you can reset the ink absorber but so far this has been done nothing.

 

Follow Steps to Fix Error 6C10 on Canon Printer

 

Based on the user's experience we have listed three verified solutions to fix Canon Printer Error 6C10. Please follow the steps accordingly or Contact Canon Printer UK for any help.

 

Solution 1:

 

Step 1: You need to move the print head to the center.

Step 2: Disconnect the printer and check on the right: is the purge unit ok? No piece of paper?

 

Solution 2:

 

Step 1: Do a reset of the printer.

Step 2: Power on

Step 3: Hold down the “Resume” button (triangle in a circle) for 15 to 20 seconds.

 

Solution 3:

 

Step 1: Switch off the printer.

Step 2: Open the door.

Step 3: Power on.

Step 4: When the cartridge is in the center, close the door.

 

Solution 4:

 

Step 1: Open the lid and allow the ink cartridge carrier to center itself.

Step 2: Locate a row of white rollers behind the carrier.

Step 3: At the end of the rollers there is a small, clear piece of plastic that sticks up. You need to wipe all of the ink off this piece of plastic using a paper towel.

Step 4: Towards the printer front there is a small square, which is about 1/2 inch per side that is a small foam pad. This is where the excess ink is collected.

Step 5: Take a small piece of paper towel and press it into the foam. Repeat this until the paper towel is no longer collecting the ink. Close the lid, turn off the printer, and then turn it back on.

Canon also has a separate and dedicated customer support team. So the user who has any concern are free to contact the Canon Printer support number (Toll-Free) which is made available on different platforms. This customer support is 24/7 active and the user may get in touch with the qualified and experienced customer support representatives. These representatives can resolve all your issues in a short span of time. Or you can get in touch with our official site.

Content Source: - https://justpaste.it/9hz0x